AMSOIL Synthetic Tractor Hydraulic/Transmission Oil

AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is the modern lubricant for modern farm and industrial equipment. AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is an all-weather Universal Tractor Transmission Oil (UTTO) engineered to meet the tough demands of heavy-duty, hydraulic-powered farm and commercial equipment.  Engineered specifically to meet the tough applications of heavy-duty, hydraulic-powered operations, AMSOIL Hydraulic/Transmission Oil exceeds the performance requirements of virtually every piece of modern machinery. With its unique blend of synthetic base stocks and advanced additive package, AMSOIL Hydraulic/Transmission Oil provides exceptional lubrication to reduce wear, resist heat, protect against rust and extend fluid and equipment service life.

Remains Stable at Temperature Extremes

AMSOIL Hydraulic/Transmission Oil operates over a wide range of temperatures. AMSOIL Hydraulic/Transmission Oil has a low volatility and high viscosity index to maintain its lubricity at high operating temperatures, and it flows at temperatures as low as -40F (-40C) for improved equipment operation and wear protection.

Provides Controlled Seal Swell

AMSOIL Hydraulic/Transmission Oil contains seal swell agents to maintain sealing integrity. It provides a slight seal swell to maintain a secure, tight fit.

Inhibits Rust and Corrosion

AMSOIL Hydraulic/Transmission Oil contains special rust and corrosion inhibitors to protect tractor components against rust and corrosion.

Inhibits Foaming

AMSOIL Hydraulic/Transmission Oil inhibits foaming. Foaming reduces hydraulic Oil pressure and diminishes the lubricating protection provided by the Oil. AMSOIL Hydraulic/Transmission Oil continues to resist foaming even when the reservoir level is low.

Suppresses Wet Brake Chatter

AMSOIL Hydraulic/Transmission Oil has friction modifier additives that effectively suppress wet brake chatter. When the friction modifier additives are depleted in a conventional hydraulic/transmission Oil, an imbalance of pressure occurs in the tractor's brake system and vibrating in the tractor can become uncontrollable. AMSOIL Hydraulic/Transmission Oil remains serviceable for up to three times longer than do conventional Oil, and its friction additives remain intact for smooth, continuous tractor operation.

APPLICATION

AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is Recommended for Applications Requiring the Following Specifications:

Tractors

• Case International - MS-1207, HYTRAN
• Caterpillar- TO-2, TO-3
• Deutz-Allis- All
• Ford - M2C41-B, M2C134-D, M2C86-B
• Hesston/Fiat - All
• John Deere - Quatrol, J20C, J20D, J14C
• Kubota, UDT - All
• Landini - All
• Massey-Ferguson - M1127-B, M1129-A, M1135 and M1141 (also known as Permatran III)
• Steiger - All
• Versatile - All

Transmissions

• Detroit Diesel Allison Division - C-4 Hydraulic Systems
• ABEX/Denison - HF-0, HF-1, HF-1A, HF-2, HF-2A
• Cincinnati Milacron - P-70
• Sundstrand - HMS-103
• Sperry New Holland - 767166, 287530
• Sundstrand Hydraulics, HMS-103

Registered Trademarks

PERFORMANCE DATA

AMSOIL Synthetic Tractor Hydraulic/Transmission Oil exceeds the following rigorous performance requirements:

• Caterpillar Friction Retention Test - Pass
• Denison Pump Test (T5D Vane Pump, 46 Series Piston Pump) - Pass
• Deutz-Allis Friction Retention Test - Pass, Deutz-Allis Turbo Hydra-Matic Oxidation Test - Pass, Deutz-Allis Power Steering Pump Test - Pass
• Ford 7710 IPTO Stall Test - Pass, Ford 7710 Brake Capacity - Pass, Ford 7710 Brake Chatter Test - Pass
• John Deere JDQ-42 PTO Clutch (2000) Cycles - Pass, John Deere JDQ-40 Brake Capacity Test - Pass, John Deere JDQ-40 Brake Torque Variation (Chatter) - Pass, John Deere JDQ-73 Cold Soak @ -35C - Pass, John Deere JDQ-74 Slow Cool @ -30C - Pass, John Deere JDQ-74 Slow Cool @ -35C - Pass
• Massey Ferguson MF-285 PTO Clutch - Pass, Massey Ferguson MF-285 Wet Brake Chatter and Torque Characteristics - Pass
• Plessy-Sundstrand Gear Pump Test - Pass
• Sundstrand Model 22-2132 Variable Displacement, Piston Pump - Pass
• Vickers 35VQ-25, Pump Test - Pass

INSTALLATION

AMSOIL Hydraulic/Transmission Oil is fully compatible with conventional hydraulic/transmission Oil. To install AMSOIL Hydraulic/Transmission Oil in a hydraulic system, drain the existing hydraulic/transmission Oil, change filters and install AMSOIL Hydraulic/Transmission Oil.

Product Code: ATH