AMSOIL Thermally Stable Biodegradable Hydraulic Oils
AMSOIL
Thermally Stable Hydraulic Oil is a premium lubricant designed to biodegrade
to its natural state when subjected to sunlight, water and microbial activity.
TBI has a very low toxicity level because the Oils is formulated with ashless
additives that do not contain heavy metals.
AMSOIL TBI incorporates very high quality synthetic base Oil that provide thermal stability, even though they are biodegradable. This Oil also contains anti-wear additives that have been thoroughly tested and qualified against stringent hydraulic Oils standards including Denison HF0, HF1, HF2, Vickers M-2950-S, 1286-S, and Cincinnati Milacron P-689, P-69 and P-70. TBI provides optimum protection for your hydraulics because it prevents wear of the pump and prevents rust of critical components. TBI contains anti-oxidants that increase the life of the Oils and it contains foam inhibitors that quickly release air from the Oil.
TBI outperforms vegetable Oil-type, biodegradable hydraulic Oil because it is based on high quality, synthetic engine oil chemistry that lasts longer and withstands heat better. This ensures problem-free operation.
Note: To see Preferred Customer Pricing add Product Code: PREG1 to Shopping Cart
APPLICATION RECOMMENDATION
AMSOIL TBI is recommended for gear, vane and piston stationary and mobile hydraulic systems. TBI is a multi-viscosity, SAE 5W-20 Oils and is recommended for use in place of either ISO-32 or IS-46 hydraulic Oil.
TBI is essentially compatible with typical hydraulic Oil and small amounts of contamination (lines, residue) is acceptable. However, it is recommended that systems be drained prior to installing TBI. Excessive system contamination will minimize its biodegradability effectiveness.
TBI is especially well suited for applications where environmental contamination due to leaking or blown hydraulic lines presents an environmental hazard.
TBI has been tested and found compatible with Nitrile (Buna-N), Poly Acrylate, Flourocarbon (Viton) and Silicone seals which are commonly found in hydraulic systems. Consult your AMSOIL sales representative or AMSOIL. when dealing with systems containing seals not listed.
The ability of TBI to extend drain intervals and excel in performance is subject to operating conditions and maintenance practices. Monitoring by Oils analysis is recommended.
