AMSOIL DOMINATOR 2 Cycle RACING oil (TDR)
AMSOIL DOMINATOR 2 Cycle Racing Oil is a robust formulation specially engineered for unsurpassed protection in high performance racing 2 Stroke motors, both on and off the track.
Dominator contains a heavier synthetic base oil that provide more lubricity for "on
the edge" operation. AMSOIL DOMINATOR 2 sStroke Racing oil reduces friction and protects
pistons and bearings subjected to the rigors of racing. AMSOIL DOMINATOR Racing
oil contains the right additives for clean motor operation.
- Provides excellent film strength for high heat, high RPM motors
- Reduces friction for maximum power
- Recommended for use with coated or non-coated racing pistons
- Recommended for use with exhaust power valves
- Recommended for use with high octane racing gas
- Burns clean; Prevents ring sticking and plug fouling
- Provides excellent protection at 50:1 pre-mix or in injection system
AMSOIL DOMINATOR Racing Oil Provides:
AMSOIL DOMINATOR Racing oils exclusive formulation, lubricates and protects high performance 2 Cycle motors, both on and off the track. High performance motors, particularly those that are modified, operate hotter and at higher RPMs than recreational motors, and they need good oil for peak performance. AMSOIL DOMINATOR Racing oil is engineered for racing. It has the right film strength and clean burning properties for on the edge operation.
Super Film Strength
High performance 2 Stroke racing motors have high compression ratios, which significantly increase combustion chamber heat and crankshaft bearing pressures. Hot combustion processes quickly burn off and evaporate light oil and cause rapid piston expansion, decreasing piston-to-cylinder wall clearances. This promotes piston scuffing and possible seizure. And increased pressure on crankshaft bearings promotes metal-to-metal contact, wear and pitting.
High heat and pressures require tough oil with better film strength and more lubricity. AMSOIL DOMINATOR Racing oil, constructed with AMSOIL heavy synthetic oil, handles high heat better than mineral oil and provides improved film strength and lubricity. AMSOIL DOMINATOR Racing oil reduces friction and provides an extra measure of protection against piston scuffing and crankshaft bearing wear.
Clean Burning
High combustion processes require the proper additives and oil to control deposits. AMSOIL DOMINATOR Racing oil contains strong, high temperature detergent additives and highly pure AMSOIL synthetic engine oil. It prevents deposits that cause ring sticking, plug fouling and exhaust port blocking. AMSOIL DOMINATOR Racing oil is an optimized product for severe service.
Applications
AMSOIL DOMINATOR Racing 2 Stroke oil is recommended for use in high performance stock or modified 2 Cycle motors, including air or liquid cooled snowmobiles, personal watercraft, motorcycles (Moto X), ATVs, go-carts and outboard motors*. Good for use with coated or non-coated pistons, high-octane racing fuels and exhaust power valves. AMSOIL DOMINATOR Racing oil is compatible with most other 2 Cycle oil, however, mixing oil should be minimized.
Use at 50:1 pre-mix ratios (2.6 oz. oil per U.S. gallon of gas) or as injection oil where JASO FC or API TC oil are specified. Not suitable for use with alcohol or nitro-methane fuels.
* AMSOIL DOMINATOR Racing oil Not suitable for long-term use in outboard motors as a TC-W3 type oil, although excellent as a race oil for short-term use where motors are periodically inspected.
| TYPICAL TECHNICAL PROPERTIES DOMINATOR Synthetic 2 Cycle Racing oil | |
| Kinematic Viscosity @ 100C, cSt (ASTM D-445) | 7.6 |
| Kinematic Viscosity @ 40C, cSt (ASTM D-445) | 40.9 |
| Viscosity Index (ASTM D-2270) | 156 |
| Pour Point C (F) (ASTM D 97) | -48 (-54) |
| Flash Point C (F) (ASTM D 92) | 92 (198) |
| Fire Point C (F) (ASTM D 92) | 97 (207) |
